Halo Mk V Armor from Halo Infinite (ripped from in-game) adapted to an action figure using my MODULYR V3 action figure template. 

This is a 6 inch or 9 inch scale figure, with 22 points of articulation. It comes with a colored visor option, the MA5B AR, Magnum pistol, and Energy Sword accessories.

Get this FREE model from any of the pages below

Video Assembly Guide

Assembly Diagram (MODULYR V2 version)

Assembly Diagram (MODULYR V3 version)

Printing Details

Filament Choice
PLA is needed for the body parts, PETG for the skeleton parts. I used a silk filament for the visor for a metallic effect. You can experiment with different filament types, but I can’t guarantee that the joints will hold as well.

Brims (body pieces)
The body pieces have brims since I’ve had issues with bed adhesion. It makes it more time consuming to take them off, so if you’re feeling confident with your bed adhesion, you can try disabling the brim.

Runners (skeleton pieces)
The skeleton pieces have runners connecting the pieces to make it simpler to identify the pieces while looking at the assembly PDF. If you don’t want to use the runners, right click the runner and skeleton pieces in MakerStudio, select Split > To Objects, then delete the runner.

Helmet + Visor multi-color
If you choose to print the helmet and visor separate for multi-color, you can delete the helmet from the body pieces plate and drag the visor-less helmet to that plate.

General Settings
I used 0.12mm layer height and 7% infill density. Feel free to change these to your liking for faster printing or more solid pieces.

Tolerance Adjustments

Since these pieces are press fit, the tolerances matter a lot. However, due to variability between filaments and printers, I can’t guarantee your printer will print everything with a good fit. 

Here’s 2 settings you can play with if parts are too tight / too loose (in Bambu Studio):

Too loose: select parts > Quality > Precision > X-Y hole compensation: set to -0.1mm & X-Y contour compensation set to 0.1mm

Too tight: select parts > Quality > Precision > X-Y hole compensation: set to 0.1mm & X-Y contour compensation set to -0.1mm

Hope you enjoy, and happy printing!